Key Ways to Operate a Water Softener

Introduction

Key Ways to Operate a Water SoftenerA water softener is essential in making the water friendly to the user. It softens water through the removal of hardness ions and other impurities. Water softener is health efficient as well as economical efficient. It improves health by reducing risks while using water. It also reduces expenses in buying detergents and making repair of materials which have suffered corrosion and staining.

However, operating water softener requires you to be keen and careful. This will improve its performance and prevent any passage and eventual usage of hard water.

Further, choosing a water softener that fits well in your home requires that you do some research into the available options out there in order for you to find a product that fits your needs. There are some excellent options out there to choose from and several water softener blogs that offer water softener comparison chart for the best products such as Aqua-Pure AP902, Fleck 5600SXT, and WaterBoss 220 that one blog claims is about as top tier as you can get, to name just a few of the available options out there.

The following include some of the ways through which operating water softener is easier;

1) Ensure that You use the Recommended Water Pressure Range

A water softener can be adjusted to use the same range as the water passing through it. This will prevent bursting of the water system. Mostly, the recommended pressure range is between 1.8 to 8.4 atmospheres.

2) Set Regeneration Cycle

Regeneration cycle depends on the amount of water to be softened. This will be based on the number of people who are using the water. Thus, you can set your water softener to run in a period in which every individual will have fully used the water.

Mostly, people consider setting it to run for 3 hours. During this period, water passing the water softener will be purified and deducted of Mg2+ and Ca2+ ions in it. However, if you use hot water, it may not be fully softened. This might introduce hardness ions into your tan.

3) Isolate the Water Softener

The water softener should be in a separate location from the water supply. You can use a bypass valve to ensure this. The valve is operated from the back using knobs. These knobs are turned in a clockwise direction. This will create and on-and-off lock using one another. The reverse turning of the knobs will enhance water softening during the regeneration cycle.

4) Use and Accurate Timer

Key Ways to Operate a Water SoftenerA 24 hour clock timer is better for this purpose. It helps you to relate your water softener with your watch. You can easily establish a water softening cycle. The water softener has a gear which is controlled by its red button. Pressing this button removes the drive gear. The big dial is then regulated to work for a specified time. After this, you can release the button and leave your water softener to work on its own.

5) Set the Automatic Regeneration Frequency

This is done using the “people” dial. It makes it possible for the water softener to work effectively on the required water for all individuals in a household. It is operated by setting the “people” dial using your hand until the setting is accomplished.

6) Regenerate Manually

Insufficient regeneration happens at times. It might cause inadequate water for use. In such a time, you may consider regenerating the water softening process manually. The knob placed in front of the REGEN position control is used to induce regeneration. This enables the water softener to complete its regeneration process. It will also supply sufficient water for use by every member of a household.

Conclusion

As long as you have your water softener manual, you can easily operate your water softener. At the same time, if you are knowledgeable on how to use the water softener, you can easily proceed and operate it. This will make it effective in completely softening the water. Also, make sure that salt and brine contained in brine tank is sufficient for effective water softening.